Terry Taylor
-
Terry Taylor replied to the topic DM Upgraded Robox - SM Printhead Swap in the forum Technical Support 4 weeks, 1 day ago
Part of the reason for the confusion may also be that AM shows dialog boxes for 2 filaments even though the QF head is installed.
-
Terry Taylor replied to the topic DM Upgraded Robox - SM Printhead Swap in the forum Technical Support 4 weeks, 1 day ago
Part of the reason for the confusion may also be that AM shows dialog boxes for 2 filaments even the QF head is installed.
-
Terry Taylor replied to the topic Empty Reels? Recycle them and get money off filament orders. in the forum Materials 1 month, 3 weeks ago
@pete, Considering the cost of shipping, there is exactly ZERO reason to do this for anyone outside the UK/EU.
-
Terry Taylor replied to the topic How do you get NinjaFlex to feed? in the forum Chatter 3 months, 1 week ago
@dave, care to share the design for your funnel? I like it!
-
Terry Taylor replied to the topic RBX01-PEI-R1 Robox ThermoSurface™ Print surface revision 1 replacement in the forum Technical Support 3 months, 3 weeks ago
Just read further and it looks like I did order the wrong one. Had not realized that the bed design had been change.
Anybody need a new style PEI?
I guess I will have to order the other one now…..
-
Terry Taylor started the topic RBX01-PEI-R1 Robox ThermoSurface™ Print surface revision 1 replacement in the forum Technical Support 3 months, 3 weeks ago
I ordered a RBX01-PEI-R1 Robox ThermoSurface™ Print surface revision 1 replacement from Circuit Specialists last week and it arrived today, but it does NOT have the 6 “ears” around it to slide under the clips. I looked at the picture her at the Robox Webstore and that also looks like it does not have the clips. Did I miss something, or did they s…[Read more]
-
Terry Taylor replied to the topic 4 colors Robox + support material in the forum Feature Request 4 months, 3 weeks ago
@Henry, I had a profile from S3D about 18 months ago, it did NOT work at all, hopefully they will actually get one working, now, but I am NOT folding my breath.
-
Terry Taylor replied to the topic TPU in the forum Materials 5 months ago
OK, thanks, Ben, will try the polly support later.
New question, see that attached photo. This is with TPU (Sainsmart). Notice the voids on the first layer. This was at the recommended slower speed (35%). Do I need to increase the flow rate?
-
Terry Taylor started the topic TPU in the forum Materials 5 months ago
Any thoughts on a good support material to use with TPU?
-
Terry Taylor started the topic Good Supplier in US in the forum Materials 5 months ago
I highly recommend these guys as a supplier for those of us in the US
https://www.circuitspecialists.com/search.html?searchQuery=robox
They have pretty good stock, ship quick and communicate well.
-
Terry Taylor started the topic Dual Media Raft in the forum Chatter 6 months ago
Does anyone know why everytime a do a dual material print, AutoMaker wants to print a raft? I don’t see the need for a raft, just because something is dual media.
-
Terry Taylor replied to the topic Trouble ticket that aren't a pain to fill out in the forum Feature Request 6 months, 4 weeks ago
At least on my computer, when I get to one of those fields, if I double-click it brings up the last thing I typed in that field (from a previous support ticket).
That works on a LOT of Web forms.
-
Terry Taylor started the topic Ceramic-like Filament in the forum Materials 7 months, 2 weeks ago
-
Terry Taylor replied to the topic TPU/TPE Filaments in the forum Materials 7 months, 3 weeks ago
@pete, One issue that I have had with NinjaFlex is ejecting it. AM only heats the extruder to 140 degrees and (at least on my machine) is not hot enough to allow the NinjaFlex to eject.
-
Terry Taylor replied to the topic RoboClock in the forum Show us your bits! 8 months, 1 week ago
Thanks for the link!
-
Terry Taylor replied to the topic RoboClock in the forum Show us your bits! 8 months, 2 weeks ago
ThingiVerse link?
-
Terry Taylor replied to the topic DM print in the forum Show us your bits! 8 months, 3 weeks ago
@pete, Thanks for that, but I do NOT remember ever seeing that mentioned anywhere. Would be nice of we had some kind of reference manual for Automaker.
-
Terry Taylor replied to the topic DM print in the forum Show us your bits! 9 months ago
OK, I am confused. When I open the .obj file, this looks like a single solid object. (Cone1.jpg). When I ungroup it, it shows as 3 different objects, but now out of alignment (Cone2.jpg). When I choose filaments, the alignment issue is MUCH more noticeable. Have seen this on several of the other DM samples provided.
-
Terry Taylor started the topic DM and NinjaFlex Question in the forum Technical Support 9 months, 1 week ago
I am (for the most part) very happy with my DM upgrade, but I am having one issue with NinjaFlex. With the new extruder (which, per the instructions) is now extruder 1, NinjaFlex prints pretty well. The secondary extruder (which HAS been upgraded with the “soft material” upgrade) does not seem to feed NinjaFlex very well. Lots of voids in the…[Read more]
-
Terry Taylor replied to the topic Robox sounds in the forum Chatter 9 months, 2 weeks ago
I have always liked the sound of stepper motors working. I prefer to think that they are happy and sing while they work!
- Load More
