Henry

For poly carbonate use PC+ or PC max. Several of the Taulman filaments should also work for what you are doing.

Java has upgraded at least once in the last month. We have gotten to a point where attacks are constant. When one gets through it changes settings and lets others through. This one wasn’t two bad but it did take a week to get everything cleared off and back to normal. I performed a clean install and things appear to back to normal. Thanks

I have been thing that. I have been battling some malware here lately. Hard to tell what damage they did.

I will try it and let you know how it works.

Thanks

The print adjustment screen is back. don’t know if the post processor is working or not yet.

Printing a tall print and noticed it. Could not find any documentation on what it did. Thought i would ask.

Thanks

Open a support ticket. with that little use you should not be having problems. There are some problems with heads that Robox technicians can repair.

Thanks for the link. The boards i have seen cost much more to the point where you might as well just buy the mode. Wife quite 2 years ago but still uses a mode. Will not hurt to print out a backup for her.

Do you have a link for the PC board.

Thanks

Please share the files. I have a couple of cameras and several unused raspberry pi’s I would not mind trying this. Design looks good.

Take a look at this thread. http://www.cel-robox.com/forums/topic/simplify3d-profile-for-robox/

Get a Raspberry pi zero w and hook up a camera. Set up a program to watch the camera and set off an alarm if the light starts flashing. Someone did something close to this back when the Pi was new. The zero is small enough, and low power enough to install inside the Robox, You get a camera feed and an alarm both. Easy peasy.

They just started shipping orders with filaments included. Just got my notice that my shipment should be in early next week.

You buy a used head and you are not quite sure what you are getting. By buying a new one you know what you have and you have a warranty, which is good. New heads can be found and Robox will get new stock in soon. I understand the money issue and i have found over time that one will not be resolved any time soon. Good luck.

You can remove the…[Read more]

I upgraded to a dual material but i still use my single material head for 60 to 70% of my prints. The single material head is cheaper and has a finer nozzle. It works better than the dual nozzle for prints that don’t require dual material.

So i don’t think you are going to get any offers. Check around there should be single material nozzles…[Read more]

Pelgrim I also am not rich and this is a hobby not a business. The guarantee does matter. My printer is over a year old and out of warranty. They set the terms when i bought the printer and have exceeded expectations. Now it’s my problem. I stated an issue i saw and expected nothing in return. Ben provided an option to keep me printing, nothing…[Read more]

Peigrim I have enjoyed your posts on programming G code in the Robox. I have learned quite a bit from your posts. This current issue is one of growth within Robox. We want our printers to keep running. As Robox continues to grow they will have continued issues with spare parts. If Ben (as an independent contractor) is able to help me i appreciate…[Read more]