AutoMaker 3.00.00 introduces Root™ control.

[Pete @pete I have both RoboxDual and other Robox versions CEL HQ Bristol UK]

GET IT NOW.

You can restart your AutoMaker and it will find it for you.

Or you can click here http://www.cel-robox.com/downloads/

 

Attachments:

You must be logged in to view attached files.

For official support please visit www.cel-robox.com/support/ and create a ticket

[Alexandre Contat @calexfr I have both RoboxDual and other Robox versions France]

cool, but I haven’t received my root 🙁 😉

Regards

Alex from France
diStudio3D

[Charlotte McClung @rendaridra]

When I try to install it it says there is an error and then closes

• This reply was modified 5 months, 2 weeks ago by  Charlotte McClung.

[BHudson @bhudson I have both RoboxDual and other Robox versions Arizona, USA]

@rendaridra Please try again now. If you have trouble with the automated download, please try the clean install method.

https://robox.freshdesk.com/solution/articles/1000155625-clean-install

There was an issue with the website that was causing Chrome to have download issues. That should be fixed now.

I operate two Betas and four Production Robox.
I am the US/Canada Technical Support engineer for the Robox.
See my 3D Hub site at https://www.3dhubs.com/phoenix/hubs/ben

[BHudson @bhudson I have both RoboxDual and other Robox versions Arizona, USA]

There is an issue with automatic updates. Until that is fixed, please use the clean install method from the support portal. CEL is working to resolve the issue.

If you get an error that the program is not compatible, please rename the file to a .zip

This may require a settings change to view the file extension.

I operate two Betas and four Production Robox.
I am the US/Canada Technical Support engineer for the Robox.
See my 3D Hub site at https://www.3dhubs.com/phoenix/hubs/ben

[Charlotte McClung @rendaridra]

The clean install worked, thank you

[eloy @eloy My Robox is a Green Kickstarter Limited Edition Helmond . Netherlands]

3.0 does not install so went back to 2.01.04 till problem is fixed.

[BHudson @bhudson I have both RoboxDual and other Robox versions Arizona, USA]

@eloy Please try the clean install option. If you have downloaded the file earlier than about 5 hours ago, please try downloading again. If you can let us know the operating system and browser you are using, we can look into what may be causing the challenge.

I operate two Betas and four Production Robox.
I am the US/Canada Technical Support engineer for the Robox.
See my 3D Hub site at https://www.3dhubs.com/phoenix/hubs/ben

[Espen René Johannessen @espenjohannessen Sarpsborg, Norway]

I am also having issues with AutoMaker 3 and have tried both autoupdate and clean install on 2 computers. I’ve also tried installing x86 instead of x64, just to have tried it, but nothing seems to help.

AutoMaker 3 installes as it should, but for some reason it does not start up. I get a splash screen for about 1 second, then the application closes without any more information. I am running Windows 10 x64 on both computers. One is a Microsoft Surface Book 4 and the other is a Dell XPS 12.

Any ideas what else I should try? I’ve created a support ticket, but I don’t expect my local dealer (Clas Ohlson AB) to get back to me any time soon since it’s easter now. For now I’ve reinstalled the old version so I can test out my brand new Titan-X filament and LokBuild plate.

[BHudson @bhudson I have both RoboxDual and other Robox versions Arizona, USA]

@espenjohannessen Please check that your anti-virus is not blocking the program from running.

I operate two Betas and four Production Robox.
I am the US/Canada Technical Support engineer for the Robox.
See my 3D Hub site at https://www.3dhubs.com/phoenix/hubs/ben

[eloy @eloy My Robox is a Green Kickstarter Limited Edition Helmond . Netherlands]

Recent download; yes. Install: yes. Automaker startup: no. Same issue like @espenjohannessen.

MacOS 10.11.6/Firefox

Attachments:

You must be logged in to view attached files.

[Espen René Johannessen @espenjohannessen Sarpsborg, Norway]

The issue seems to be related to OS language. I tried changing to English (US) and now AutoMaker starts without any problems. I’ve informed Chris in the support ticket.

[Author]

Posts