This topic contains 75 replies, has 43 voices, and was last updated by Rémy 4 months, 2 weeks ago.
-
Posts
-
I had that first. Second time it worked.
Had it well calibrated before so had to start over
Good update so far though!
is it taking longer for your bed to heat up ?
Btw, the speed toggle is brilliant!!!
-
This reply was modified 5 months, 1 week ago by
Jack.
@pete I have Mac Yosemite OS X and Mac Mountain Lion OS X running on either machine here.
Me too.
Windows 8.1, 64 bit.
have any of you guys had many errors i keep getting a resit reel in position 2 error haven’t got a clue what it is but it stops my prints every time
smitty@smitty - No errors. Well i do have 1 that came on, says the bed thermistor is faulty :S, but then resets and its fine.
I have had to do nozzle calibrations a lot, it keeps ooozing out on occasion.
Think it needs a bit more tweaking but prints, once there ok, do seem to be doing better.
@jack-strong i ended up uninstalling the software and since then its been running pretty smoothly ,and a couple minor glitches ,like if your doing a reprint sometimes the software crashes and needs to be reset but on the whole its nice and curb seems so much better
smittycount me in:
Windows 7 64 bits@smitty - Is it me or does the bed take ages to heat up now ?
@jack-strong i haven’t really noticed much difference in the time it takes to heat the bed ,but I’ve noticed its taking a bit longer with cura before you can undock the printer ,other than it feels about the same
smittyLiterally takes 10 minutes for my bed to heat up. Rolled back the software and no bed thermistor errors, 3 mins for bed to heat :s
-
This reply was modified 5 months, 1 week ago by
The topic ‘AutoMaker 1.01.00 Testers needed - Apply here’ is closed to new replies.
