Titan X or nGen?

[BHudson @bhudson I have both RoboxDual and other Robox versions Arizona, USA]

@dcarlson Just buy nGen straight from ColorFabb or from PrintedSolid. The profiles are in AutoMaker. You just need a turntable or other filament stand for the reel since it doesn’t have the SmartReel hub.

I operate two Betas and four Production Robox.
I am the US/Canada Technical Support engineer for the Robox.
See my 3D Hub site at https://www.3dhubs.com/phoenix/hubs/ben

[David @dcarlson US]

@bhudson I would normally purchase the raw material on larger spools, but this will be used in a production environment. The preprogrammed, quick swap replacement is ideal for our production as it completely eliminates the possibility of incorrect settings, and requires no additional labor to respool smartreels. If the CEL stock will not be reliable we may have to spool our own smartreels, but I was hoping to avoid that as a cost saving measure.

[Pete @pete I have both RoboxDual and other Robox versions CEL HQ Bristol UK]

Yes PLA is arriving at the same time, lots of colours.

 

Oh and the delay recently is because we have a new supplier for much of the range. They should be far more reliable and we will be able to top up stock more easily when we get large orders by surprise.

• This reply was modified 3 months, 1 week ago by  Pete.

For official support please visit www.cel-robox.com/support/ and create a ticket

[Author]

Posts