Raspberry Pi 3 + 7" screen case for Root

[Juan Barbini @juan15pablo Argentina]

I bought the root software and I installed it on my Raspberry pi 3 with 7″ screen.

Like Mote case is for 5″ screen, I decided to look at thingiverse a nice case for my equipment.
Finally I liked this case and I printed it with ABS silver filament (no metal fill) to match with the Robox.

https://www.thingiverse.com/thing:1585924

I attach some photos of the case. Note: Root is on top of the Robox only for the photo.

Regards!

• This topic was modified 3 months, 1 week ago by  Juan Barbini.

Attachments:

1. IMG_20170618_092019806.jpg
   

2. IMG_20170618_092104056.jpg
   

3. IMG_20170618_092039375.jpg
   

4. IMG_20170618_091737360.jpg
   

[Pete @pete I have both RoboxDual and other Robox versions CEL HQ Bristol UK]

looks very nice.

Do you have a link or model number for the screen you used?

For official support please visit www.cel-robox.com/support/ and create a ticket

[Juan Barbini @juan15pablo Argentina]

Hi @pete!

Is the 7″ screen of Element14:

https://www.element14.com/community/docs/DOC-78156/l/raspberry-pi-7-touchscreen-display

It works great. The only issue that I had is that the Root soft was configured for portrait and the case works better for landscape. So I rotate the screen and also had to rotate the touch.
The cons of this is that It looks like the soft is not optimized for landscape: the black bar of home/config partially cover some options of the control of Robox.

 

Regards!

[Author]

Posts