How to program an individual head to either rize or sink the temperature

[Claus Petersson @idefixer Partille, Sweden]

Hi

I have a dual head, 2×0,3 mm.

I I would like to set the temp. To a specific head, can I do that via the console in code? And how do I direct the command to either head.

I think that the T0 ist the right one of the the heads if You front the printer and it is fed with extruder/filler no 2. Somewhat confusing!

 

brg

Claus

[click @click My Robox is a Green Kickstarter Limited Edition]

@idefixer DM head has two 0.4mm nozzles. SM (and S2) heads have 0.3mm + 0.8mm nozzles.

Command to heat up head is M104 followed by modifier S and T (one or another head - don’t ask me which one is which O:)

So, in DM head you can do M104 S200 to heat up … wait - let me fire up AM and I’ll tell you which nozzle is which:

T - first nozzle, blue colour on the left hand side - upper feed point - right nozzle

S - second nozzle, orange colour, bottom feed hole, left nozzle

Back to gcode:

M104 S200 will heat up first nozzle. But that is only from GCode Console.

On the other hand, each material defined in AM will have first layer head temperature and subsequent layers temperature defined and the moment you start printing with specific material it will read info from it (reel EEPROM if you are using original robox reels or material details of selected material for the nozzle).

[click @click My Robox is a Green Kickstarter Limited Edition]

That G code explained on the page 102 of Robox manual: http://www.cel-robox.com/downloads/

[Claus Petersson @idefixer Partille, Sweden]

Thanks, It realy helped because the manual did not explain it so exactly as You did. Now I know. And You are Quit right it is 2 x 0,4 mm not 0,3.

 

Brg

Claus

[Author]

Posts