Topic: colorFabb_HT

This topic contains 5 replies, has 4 voices, and was last updated by Microcan 6 months, 1 week ago.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
01/03/2016 at 8:59 am #27285

Microcan @microcan

My Robox is a Blue Commercial Version

It looks like colorFabb is releasing a high temperature filament next month.

@pete Did CEL got samples of this filament.

01/03/2016 at 11:56 pm #27318

David @dmullerdesign

My Robox is a Blue Commercial Version

I know, very exciting. I already have a use for this too!

02/03/2016 at 7:48 am #27322

Microcan @microcan

My Robox is a Blue Commercial Version

Not much info at this time:

http://ht.colorfabb.com

02/03/2016 at 10:55 am #27326

Pete @pete

My Robox is a Blue Commercial Version

CEL HQ Bristol UK

We saw that, have asked for samples.

It must be very new, they havent mentioned it to us and we talk all the time.

For official support please visit www.cel-robox.com/support/ and create a ticket

03/03/2016 at 6:28 am #27375

hagster @hagster

My Robox is a Blue Commercial Version

UK

Is it this co-polyester 910A

https://www.google.co.uk/url?sa=t&source=web&rct=j&url=https://3dhubs.s3-eu-west-1.amazonaws.com/s3fs-public/talk/attachments/Co-Polyester%2520Presentation.pdf&ved=0ahUKEwi7xteA8KPLAhWCNpoKHXCdD-UQFggfMAE&usg=AFQjCNGSv-PILaQ9XJju-S4DIp39ASs-5g&sig2=dbGb3pVZjYBOW7Z-DzRnBw

Prints hot at 260deg.

03/03/2016 at 8:52 am #27385

Microcan @microcan

My Robox is a Blue Commercial Version

@hagster

Thank you for the info. Very nice article. Gives useful info about differences between the different materials. More warping for colorFabb_HT is difficult to handle.

I really like NGEN because it has less wrapping than PLA. The article shows a problem I saw with PLA. See photo.

Attachments:
You must be logged in to view attached files.
Author

Posts