Notewell
-
Notewell replied to the topic Is this new in the forum Chatter 2 weeks, 3 days ago
The first and major aggravation, is that the bed is not level
Running the bed leveling function does not help, any ideas?
-
Notewell replied to the topic Is this new in the forum Chatter 2 weeks, 3 days ago
Thank You
Old one was 8gb
All I could buy was 16 or 32 gb class 10. It now has the 16gb card installed and seems to be working as normal. (I had written perfectly but my Robox is never that)
Please add to the statement below “World Wide After Hours”
I am the US/Canada Technical Support engineer for the Robox.
If you had not responded, the m…[Read more]
-
Notewell replied to the topic Is this new in the forum Chatter 2 weeks, 4 days ago
Thank You, any benefit in going to 8gb sd card?
-
Notewell started the topic Is this new - SD card error in the forum Chatter 2 weeks, 4 days ago
My Robox is around 2 years old. printing in draft towards the end of a print and I get an error I have not seen before
I was told to turn off the power, disconnect the printer as I had an sd card error. Not sure of actual message I was too surprised to take note of it really. What sd card?
Turned it off and on again and all seems normal!
-
Notewell started the topic Is this new in the forum Chatter 2 weeks, 4 days ago
My Robox is around 2 years old. printing in draft towards the end of a print and I get an error I have not seen before
I was told to turn off the power, disconnect the printer as I had an sd card error. Not sure of actual message I was too surprised to take note of it really. What sd card?
Turned it off and on again and all seems normal!
-
Notewell started the topic Top surface in draft in the forum Chatter 2 months, 3 weeks ago
My top surface in draft always looks like it either needed another layer or support that was closer together.
How are your results and how do you overcome it, if you bother.
Nigel
-
Notewell replied to the topic Not Slicing in the forum Technical Support 2 months, 3 weeks ago
Thank you all for your efforts, I was thinking it was a problem I was creating with shoddy cad work. I had to add a core print, so support was not needed. Printing in draft and about an hour to go, looks fine.
Henry, it is for a hot air engine.
Many Thanks
Nigel -
Notewell replied to the topic Not Slicing in the forum Technical Support 2 months, 4 weeks ago
Thanks for your time, it is nice of you to help.
Many Thanks
Nigel
-
Notewell replied to the topic Not Slicing in the forum Technical Support 2 months, 4 weeks ago
That was interesting. My cad is telling me it does not require healing, but when I heal it anyway it is only 94% repaired!
Took file into Freecad and after mesh repair, almost half of the part has gone missing!
-
Notewell replied to the topic Not Slicing in the forum Technical Support 2 months, 4 weeks ago
Thank You for taking the time to check my file.
I ran it through Netfabb basic and ran the repair but it made no difference. Perhaps I did not do it right!
-
Notewell started the topic Not Slicing in the forum Technical Support 2 months, 4 weeks ago
Can anyone tell me why Automaker will not slice this?
No complaints about file, just takes forever to do anything and then it just says “Slicer failed to create G code within the print volume”
I have checked the solid in my cad and it appears to be ok
Any ideas
-
Notewell replied to the topic Head adjustment in the forum Chatter 4 months ago
Thank You, it worked, I can now adjust the head height.
-
Notewell replied to the topic Head adjustment in the forum Chatter 4 months ago
Will that save? Nothing else wants to!
-
Notewell started the topic [resolved] Head adjustment not saving in the forum Chatter 4 months ago
Hi All
I am unable to manually adjust head height in either v.04 or v.03 any ideas as to why.
Head is being recognised correctly but the serial number is not showing and a circle with a red X in it shows up at the end of that line.
-
Notewell started the topic Head adjustment in the forum Chatter 4 months ago
Hi All
I am unable to manually adjust head height in either v.04 or v.03 any ideas as to why.
Head is being recognised correctly but the serial number is not showing and a circle with a red X in it shows up at the end of that line.
-
Notewell replied to the topic Best filament to use for lost wax type casting in the forum Chatter 4 months, 1 week ago
No I have a friend who does excellant foundry work and we are trying to use our combined skills usefully
-
Notewell started the topic Best filament to use for lost wax type casting in the forum Chatter 4 months, 1 week ago
Has anyone experience of making a print which is used as a pattern in the aluminium casting process. The one where the print is burned out of the shell into which the molten metal is poured. Is there a better filament to use than PLA?
-
Notewell replied to the topic Does anyone know the terminology for this?….. in the forum Chatter 4 months, 2 weeks ago
This effect has been taking place for so long and so often, I just thought it was normal. I have had my Robox 2 years plus and it has always been there.
It would be lovely if it would disappear
-
Notewell replied to the topic Is this Normal? in the forum Chatter 9 months, 3 weeks ago
I think it may have been because a 4 mm wall was going to be created around the perimeter.
-
Notewell replied to the topic What to do when the warranty rruns out in the forum Chatter 9 months, 3 weeks ago
Here in Australia, I understand the warranty will be reduced to one year.
I know the machines have improved, but one year is not long enough for me to feel comfortable.
Do you know if there are plans to fit a device similar to your bracket to stop the cables fouling high parts? I would want that in a new machine!
- Load More
