Topic: Unable to automatically add model

RoboxDual › Forums › Technical Support › Unable to automatically add model

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of BHudson BHudson 1 day, 10 hours ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 17/03/2017 at 12:34 pm #37840

    Charlotte McClung @rendaridra

    I have uninstalled and re-installed automaker but it still does not allow me to add a model via the button and now I am having to drag a model to it. I haven’t changed anything before this started happening.

    17/03/2017 at 2:52 pm #37843
    Profile photo of BHudson
    BHudson @bhudson
    I have several Robox units Kickstarter and Commercial
    Arizona, USA

    @rendaridra This is usually an indication that you have opened a model from a location that is no longer available. We are working on a solution and it should be part of the next release of AutoMaker. If you don’t like drag and drop, you can do a clean install and that may solve the behavior. Or, you can identify and insert the missing media, which should re-enable the add button, and then load a model from non-removable storage to reset the function.

    I operate two Betas and one Production Robox.
    I am the US/Canada Technical Support engineer for the Robox.
    See my 3D Hub site at https://www.3dhubs.com/phoenix/hubs/ben

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.