Root and mote on Roboxpro : screen orientation

[Oliver @lobat37 Grenoble, France]

Hi community

I flashed the sd card of my root of my roboxpro, but the screen is reversed…

I tried to modified the config file in the SD card root, like written in the file comment :

 

#For Root, set display_rotate to 3.
#FOR Pro, set display_rotate to 1.
display_rotate=1

The screen is turned in the good orientation but the screenshot (tactile) is wrong. When I push on the screen on the top, it’s detected in the bottom, and reverse…

Does anybody know how to do ?

Does somebody having a pro can copy me the config.txt file in order I check if it’s different ?

I can open a ticket, but if somebody knows… 🙂

Thank in advance for your help.

Oliver

[Pete @pete I have both RoboxDual and other Robox versions CEL HQ Bristol UK]

@lobat37 there are 2 version of the Root software, the one for RoboxPro has an inverted screen and touch interface.

You may have been given the wrong file link to download. Let the offending person know and they will send you the correct link.

For official support please visit www.cel-robox.com/support/ and create a ticket

[Pete @pete I have both RoboxDual and other Robox versions CEL HQ Bristol UK]

Ah, if you are happy to poke around the files via ssh you should send this command

sudo touch /boot/RoboxPro

Then edit the file

/boot/config.txt

change value of parameter display_rotate to 1. (Comment to that effect above it in the file.)

For official support please visit www.cel-robox.com/support/ and create a ticket

[Author]

Posts