This topic contains 5 replies, has 3 voices, and was last updated by 
Jack 3 months ago.
-
Posts
-
Hi guys
So I took the bed plate off to give it a good clean. I then put it back in and clicked on home then this happened. It now keeps happening! Help
Also on maintenenance the y limit doesn’t go true when I push the bed to the back :s Was all working fine upto now
Yes, looks exactly like Y limit switch is not activated. You should be able to locate and test the limit switch, details should be up on the website. If the switch works then there is an obstruction stopping the bed from moving all the way back to activate the limit switch.
Got a link my any chance ?
Only thing I could find was to push it to the back.
Solved it! Take notes CEL i will be in touch Monday. I had not put the bed on back properly. The rear clip was bending backwards as the bed hadnt gone under it.
@jack-strong - Thank you for doing this, as I just did the same thing myself.
It’s awful when it happens! So glad it’s fixed now
You must be logged in to reply to this topic.