Bed probing
To achieve the surface topography mapping and bed levelling we needed a probe system. There are many ways to achieve this with varying cost and reliability, we made a completely [...]
Automatic gantry levelling
One of the most annoying things we found with 3D printers we have tested is bed levelling. Manually twiddling knobs for an unpredictable amount of time just to find that [...]
Adaptive bed levelling
The first layer of a print is the most important. If it comes unstuck it is wasted time and material or at worst it gets jammed in the printer and [...]
A/C bed heater
We did not realise that our bed heater was fast. 5 mins to get to 150°C isn’t that exciting until you compare it to other printers. Easily 4 times faster [...]
Removable, flexible, reusable PEI build plate
Painters tape, gluestick, hairspray, scrapers, release agent, cut fingers and breakages. None of this is required if you have a Robox ThermoSurface. PEI is a high temperature resin which does [...]
Removable, flexible, reusable PEI build plate
A simple software tool which allows you to quickly choose which face of an object should be oriented toward the print surface. No rotating back and forth to try to [...]
Single click align to bed
A simple software tool which allows you to quickly choose which face of an object should be oriented toward the print surface. No rotating back and forth to try to [...]
Volumetric Extrusion
3D printing is creating a volume of material yet most printers are still measuring their feed in millimetres. Robox introduced volumetric extrusion so all our calculations are made in a [...]
Dual Pinch Wheel Extruder
Robox extruders have more pushing force than any other extruder at a tested minimum of 5.5kg and typically over 6kg. This allows higher speed material feed without skipping or fluctuation [...]