Incense stick holder

[paulsroom @paulsroom My Robox is a Blue Commercial Version Chichester, UK]

I decided to perfume the air in my room with an incense stick. But although I have a holder somewhere I don’t know where it is. So I decided to 3D print a simple one incorporating an ash tray. I tilted the holder part very slightly and made the hole an oval, to additionally ensure that the incense stick tilted in the direction I wanted. There are commercial holders with integral trays, but the incense stick is held at a steep angle – almost horizontal.

Attachments:

1. incense-holder.jpg
   

2. incense-ash-tray.jpg
   

[Author]

Posts